Jantzen Audio C-Coil 0,68 – 20,00mH 17AWG Toroidal Core Audio Inductor

The C-Coil is wound on a laminated steel toroidal core. The C-Coil has extremely low resistance and can shift a large amount of power without getting over heated. With the C-Coil, we can get very close to a de facto “zero ohm” audio inductor. The power handling data in watt RMS were measured at 8Ω…

This product is currently out of stock and unavailable.

Category: , ,
Tags:

Rating: 4 out of 5.

Description

PRODUCT FEATURES
The unique properties of the C-Coils make them the ultimate inductors for the bass section for certain crossover designs, where a large power handling and extremely low resistance is desirable.
The coil is wound on a toroidal core and using shrink foil to reduce microphonic effect.
The C-Coil is only recommended for positions crossed below 1,2 kHz.
For instructions on how to correctly measure inductance for C-Coils, kindly contact us for a comprehensive measuring guide.

TECHNICAL DATA
Wound with ETP (ElectrolyticToughPitch) C11000 / IACS certified copper wire
Available wire gauges 1,2 mm 1,4 mm 1,6 mm 1,8 mm 2,0 mm; 17 AWG 15 AWG 14 AWG 13 AWG 12 AWG;
Toroidal core made from epoxy laminated steel plates
Power handling: 400 to 3000 Watt RMS (depending on wire thickness and core size)
Inductance tolerance: +/ 5%
DCR (coil resistance) tolerance: +/ 10%
All CCoils are measured after being wound, using a professional LCR bridge @ AC 1V 1kHz
Suitable for positions crossed below 1,20 kHz

Additional information

Inductance [mH]

0,68mH +/-5% 0,05Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD58 H25, 1,4mH +/-5% 0,08Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 1,5mH +/-5% 0,08Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 2,0mH +/-5% 0,09Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD69 H25, 2,2mH +/-5% 0,09Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD69 H25, 2,5mH +/-5% 0,09Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 2,7mH +/-5% 0,09Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 3,0mH +/-5% 0,10Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 3,5mH +/-5% 0,09Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 3,9mH +/-5% 0,10Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 4,7mH +/-5% 0,13Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 5,0mH +/-5% 0,13Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 5,1mH +/-5% 0,13Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 5,6mH +/-5% 0,13Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 6,2mH +/-5% 0,15Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-50 OD91 H32, 6,7mH +/-5% 0,14Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 6,8mH +/-5% 0,17Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 8,2mH +/-5% 0,19Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD71 H25, 8,2mH +/-5% 0,17Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-30 OD81 H26, 10,0mH +/-5% 0,21Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-10 OD69 H26, 13,3mH +/-5% 0,25Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-40 OD87 H28, 15,0mH +/-5% 0,31Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-40 OD87 H31, 18,0mH +/-5% 0,30Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-50 OD91 H32, 20,0mH +/-5% 0,30Ω +/-10% 500W/8Ω wire 1,2mm=17AWG core-50 OD91 H32

Reviews

There are no reviews yet.

Be the first to review “Jantzen Audio C-Coil 0,68 – 20,00mH 17AWG Toroidal Core Audio Inductor”

Your email address will not be published. Required fields are marked *