Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series

5 642,40 лв.

An 8-Series mixer-recorder supplies power to the SL-2 and slotted-in receivers – no external DC connector needed. Analog or digital audio is sent from the receivers into the mixer-recorder via the expansion port, reducing messy cabling for power and audio connectivity. The SL-2 offers antenna distribution to slot-in receivers, spreading out the placement of antennas…

SKU: SL-2
Category:

Rating: 4 out of 5.
Brand:

Description

Streamline your bag with the SL-2 Dual SuperSlot Wireless Module. This two slot-in wireless receiver integration system easily mounts to the top panel of any 8-Series mixer-recorder. UniSlot and SuperSlot™ wireless receivers from a variety of manufacturers are accepted, including Audio Ltd, Lectrosonics, Wisycom, and Sennheiser. The SuperSlot protocol supports up to four channels of wireless audio per slot.

An 8-Series mixer-recorder supplies power to the SL-2 and slotted-in receivers – no external DC connector needed. Analog or digital audio is sent from the receivers into the mixer-recorder via the expansion port, reducing messy cabling for power and audio connectivity. The SL-2 offers antenna distribution to slot-in receivers, spreading out the placement of antennas for better RF performance. The rear panel of the SL-2 is equipped with two TA3 connectors for an additional four inputs of AES3 audio and two 4-pin Hirose DC Outputs, each supplying up to 500 mA for powering additional equipment.

  • Compatible with the 833, 888, and the Scorpio.
  • Supports up to 8 channels of audio.
  • Accepts two UniSlot or SuperSlot wireless receivers from Sound Devices, Audio Ltd, Lectrosonics, Sennheiser, and Wisycom.
  • Built-in antenna distribution with antenna powering for active antennas or boosters.
  • Supports remote control of third party smart antennas.
  • Two auxiliary MCX antenna ports for connecting other receivers or RF distribution.
  • Two TA3 AES3 inputs for 4 channels of digital audio.
  • Two DC Outputs via Hirose 4-pin connectors, each supplying up to 500 mA.
  • Powers via an 8-Series mixer-recorder.
  • Accepts either analog or digital audio from slot-in receivers.
  • Ability to set and monitor multiple functions of a SuperSlot-compatible receiver from the 8-Series mixer-recorder.
  • RF Scan with visual representation of the RF spectrum.
  • Monitor transmitter battery, receiver audio, and RF levels.
  • Rugged, lightweight, and compact design.
  • Mounts to the top of any 8-Series mixer-recorder.
  • Same width as the 833.
SL-2 Dual SuperSlot Wireless Module for 8-Series

Specifications

Powering
  • All power supplied by host 8-series machine
  • SL-2 idle power draw 1.3 W (without receivers or antenna)

 

Antenna
  • Antenna Impedance
    • 50 ohms
  • Antenna Powering
    • 12V at 200 mA, menu selectable on/off
    • Serial remote control, Wisycom-compatible for ADFA and LFA powered antenna etc.
  • Antenna Pre-select Filters
    • Menu selectable:
    • Wideband/bypass (low pass filter, 1.7 GHz upper cut-off)
    • 470-614 MHz
    • 542-694 MHz
    • 606-770 MHz
    • 770-960 MHz
    • 1240-1260 MHz

 

Input RF Attenuators
  • 0 to -1 8dB, in 6 dB steps, menu selectable

 

RF Outputs
  • Auxiliary Antenna Outputs for additional receiver

 

DC Outputs 1-2
  • 500 mA max (each), 6-18 VDC passed through from host 8-series machine, depending on power source. Hirose 4-pin connector: pin 4 = +, pin 1 = ground.

 

AES Inputs
  • Two pairs for a total of four channels, AES-3 balanced, 110 ohms, TA-3 connectors

 

Dimensions
  • H x W x D
    • 4.5 cm x 21.3 cm x 13.1 cm
    • (1.8 in x 8.4 in 5.1 in)
  • Weight
    • 1.35 lbs (unpackaged)
    • 0.61 kg (unpackaged)

Reviews

There are no reviews yet.

Be the first to review “Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series”

Your email address will not be published. Required fields are marked *