Jantzen Audio Cross Cap MKP 0,10 - 1,80 µF +/- 5% 400 VDC Metalized Polypropylene Foil Capacitor

Jantzen Audio Cross Cap MKP 0,10 – 1,80 µF +/- 5% 400 VDC Metalized Polypropylene Foil Capacitor

Price range: 3,00 лв. through 4,00 лв.

The Jantzen Cross Cap (low-value range) is a budget-friendly film capacitor designed for crossover networks where small capacitance values are required — particularly in high-pass filters for tweeters or trap notch filters. Metalized Polypropylene Foil Capacitor. The Cross Cap is offering a high-level of performance and quality at a very reasonable price point.

Category: , ,
Tags: , ,

Rating: 4 out of 5.

Description

The Jantzen Cross Cap (low-value range) is a budget-friendly film capacitor designed for crossover networks where small capacitance values are required — particularly in high-pass filters for tweeters or trap notch filters.

Though entry-level, the Cross Cap delivers clear performance and stability far beyond electrolytic caps in terms of sound quality and lifespan.

🔧 Key Specs:

  • Capacitance Range: 0.10 – 1.80 µF

  • Tolerance: ±5%

  • Voltage Rating: 400 VDC

  • Dielectric: Metallized polypropylene foil

  • Type: Non-polarized, axial leads

  • Loss Factor (ESR): Moderate — better than electrolytics, higher than Z-Caps

🎧 Sound Characteristics:

  • Clearer and more accurate than budget bipolar electrolytics

  • Slightly soft top-end compared to higher-tier Z-Caps

  • Stable tone, decent transient handling, low distortion at this price point

✅ Recommended For:

  • Tweeter crossovers in budget or DIY 2-way speakers

  • Notch filters for resonance control

  • Replacement for small-value electrolytics in older speaker designs

PRODUCT FEATURE
The Cross Cap is offering a high-level of performance and quality at a very reasonable price point.
A great multipurpose entry-level audiophile capacitor.
A single foil (standard type MKP/PP foil) construction that uses a good quality aluminum and zinc based metalized polypropylene foil.
Available in a very wide range of capacitance values.
Virtually free of distortion and delivers a pleasant and rather neutral sonic profile.

TECHNICAL DATA
Capacitor foil: Polypropylene foil metalized with Zinc (Zn) and Aluminium (Al)
Dielectric insulation: Polypropylene film
Terminal leads: Tinned 4N copper wire
Voltage rating: 400 VDC / 250 VAC
Working Temperature Range: -40C to + 85C
Capacitance tolerance: +/- 5%
Loss factor at 1 kHz (maximum)
• C< l uF : 5 * 104
• C> l < 20 μF : 105
• C> 20 μF : 105
Insulation resistance at 1 kHz
• C < l μF : 5 * 104 MOhm
• l < 20 uF : 3 * 104 MOhm
•C > 20 uF : 104 MOhm

⚖️ Compared to Higher-End Jantzen Models:

Feature Cross Cap (0.10–1.80 µF) Superior Z-Cap Silver Z-Cap
Sound Quality Basic, clear enough Open, detailed Ultra-transparent, fast
Clarity & Depth Acceptable High Exceptional
Price $ $$$ $$$$
Application Budget tweeters/notches High-end tweeters/mids Reference-grade tweeter use

💡 Bottom Line:

For cost-sensitive designs needing small capacitance values in high-frequency sections, the Cross Cap 0.10–1.80 µF offers a solid step up from electrolytics without the premium price of audiophile-grade caps.

Additional information

Capacity [µF]

0,10 µF +/- 5% 400 VDC MKP Size: dia.7 x 18 mm, 0,12 µF +/- 5% 400 VDC MKP Size: dia.7 x 18 mm, 0,15 µF +/- 5% 400 VDC MKP Size: dia.8 x 19 mm, 0,18 µF +/- 5% 400 VDC MKP Size: dia.8 x 19 mm, 0,22 µF +/- 5% 400 VDC MKP Size: dia.9 x 25 mm, 0,27 µF +/- 5% 400 VDC MKP Size: dia.9 x 19 mm, 0,30 µF +/- 5% 400 VDC MKP Size: dia.9 x 19 mm, 0,33 µF +/- 5% 400 VDC MKP Size: dia.9 x 25 mm, 0,39 µF +/- 5% 400 VDC MKP Size: dia.9 x 25 mm, 0,43 µF +/- 5% 400 VDC MKP Size: dia.10 x 25 mm, 0,47 µF +/- 5% 400 VDC MKP Size: dia.10 x 25 mm, 0,50 µF +/- 5% 400 VDC MKP Size: dia.10 x 25 mm, 0,51 µF +/- 5% 400 VDC MKP Size: dia.10 x 25 mm, 0,56 µF +/- 5% 400 VDC MKP Size: dia.11 x 25 mm, 0,68 µF +/- 5% 400 VDC MKP Size: dia.11 x 25 mm, 0,82 µF +/- 5% 400 VDC MKP Size: dia.12 x 25 mm, 1,00 µF +/- 5% 400 VDC MKP Size: dia.11 x 31 mm, 1,10 µF +/- 5% 400 VDC MKP Size: dia.12 x 31 mm, 1,20 µF +/- 5% 400 VDC MKP Size: dia.12 x 31 mm, 1,50 µF +/- 5% 400 VDC MKP Size: dia.14 x 31 mm, 1,60 µF +/- 5% 400 VDC MKP Size: dia.14 x 31 mm, 1,80 µF +/- 5% 400 VDC MKP Size: dia.15 x 31 mm

Reviews

There are no reviews yet.

Be the first to review “Jantzen Audio Cross Cap MKP 0,10 – 1,80 µF +/- 5% 400 VDC Metalized Polypropylene Foil Capacitor”

Your email address will not be published. Required fields are marked *

Най-популярни в същата категория

  • Jantzen Audio Air Core Coil 0,850 - 2,300mH 17AWG

    Jantzen Audio Air Core Coil 0,850 – 2,300mH 17AWG

    Price range: 36,00 лв. through 76,00 лв.
    Select options
  • Jantzen Audio Air Core Coil 2,400 - 22,000mH 17AWG

    Jantzen Audio Air Core Coil 2,400 – 22,000mH 17AWG

    Price range: 64,00 лв. through 292,00 лв.
    Select options
  • Jantzen Audio Air Core Coil 1,800 - 22,000mH 14AWG

    Jantzen Audio Air Core Coil 1,800 – 22,000mH 14AWG

    Price range: 109,00 лв. through 465,00 лв.
    Select options
  • Jantzen Audio Ceramic Audio Resistor 0,10 - 3,30Ω 5W 5%

    Jantzen Audio Ceramic Audio Resistor 0,10 – 3,30Ω 5W 5%

    1,00 лв.
    Select options
  • Jantzen Audio Resistor Mox 5,10 - 100,00Ω 5W 5% Foil Based Audio Resistor

    Jantzen Audio Resistor Mox 5,10 – 100,00Ω 5W 5% Foil Based Audio Resistor

    2,00 лв.
    Select options