Your basket is currently empty!
Jantzen Audio C-Coil 6,40mH 18AWG Toroidal Core Audio Inductor
The C-Coil is wound on a laminated steel toroidal core. The C-Coil has extremely low resistance and can shift a large amount of power without getting over heated. With the C-Coil, we can get very close to a de facto “zero ohm” audio inductor. The power handling data in watt RMS were measured at 8Ω…
Description
PRODUCT FEATURES
The unique properties of the C-Coils make them the ultimate inductors for the bass section for certain crossover designs, where a large power handling and extremely low resistance is desirable.
The coil is wound on a toroidal core and using shrink foil to reduce microphonic effect.
The C-Coil is only recommended for positions crossed below 1,2 kHz.
For instructions on how to correctly measure inductance for C-Coils, kindly contact us for a comprehensive measuring guide.
TECHNICAL DATA
• Wound with ETP (Electrolytic–Tough–Pitch) C11000 / IACS certified copper wire
• Available wire gauges 1,2 mm – 1,4 mm – 1,6 mm – 1,8 mm – 2,0 mm; 17 AWG – 15 AWG – 14 AWG – 13 AWG – 12 AWG;
• Toroidal core made from epoxy laminated steel plates
• Power handling: 400 to 3000 Watt RMS (depending on wire thickness and core size)
• Inductance tolerance: +/– 5%
• DCR (coil resistance) tolerance: +/– 10%
• All C–Coils are measured after being wound, using a professional LCR bridge @ AC 1V – 1kHz
• Suitable for positions crossed below 1,20 kHz
• Wound with ETP (Electrolytic–Tough–Pitch) C11000 / IACS certified copper wire
• Available wire gauges 1,2 mm – 1,4 mm – 1,6 mm – 1,8 mm – 2,0 mm; 17 AWG – 15 AWG – 14 AWG – 13 AWG – 12 AWG;
• Toroidal core made from epoxy laminated steel plates
• Power handling: 400 to 3000 Watt RMS (depending on wire thickness and core size)
• Inductance tolerance: +/– 5%
• DCR (coil resistance) tolerance: +/– 10%
• All C–Coils are measured after being wound, using a professional LCR bridge @ AC 1V – 1kHz
• Suitable for positions crossed below 1,20 kHz
Additional information
| Inductance [mH] | 6,4mH +/-5% 0,24Ω +/-10% 400W/8Ω wire 1,0mm=18AWG core-30 OD81 H26 |
|---|
Най-популярни в същата категория
Jantzen Audio Ceramic Audio Resistor 3,60 – 100,00Ω 5W 5%
-
Jantzen Audio Ceramic Audio Resistor 0,10 – 3,30Ω 5W 5%
Jantzen Audio Superes 3,30 – 100,00Ω 10W 1% L<1µH Wire Wound Audio Resistor
Jantzen Audio Superes 0,10 – 3,00Ω 5W 1% L<1µH Wire Wound Audio Resistor
Jantzen Audio Compact MKT 1,0 – 100 µF +/- 5% 160 VDC Metalized Polyester Film Capacitor
Reviews
There are no reviews yet.